
Audio Technica
Refine Search
- Element: Fixed-change back plate, permanently polarized condenser
- Polar Pattern: Hyper cardioid
- Frequency Response: 100 - 16,000 Hz
- Open Circuit Sensitivity: -37dB (0dB=1V/Pa, 1kHz)
- Weight: Approx. 36g (1.3oz)
- Cable: 3.0m (9,8’)
- Dimensions: (H) 15mm (0.59”) x (D) 16mm (0.63”) x (L) 160mm (6.30”)
RM299.00
RM500.00
- Microphone Type:Condenser
- Polar Pattern:Cardioid
- Diaphragm Size:0.63" (16mm)
- Frequency Response:20Hz-20kHz
- Max SPL:144dB
- Output Impedance:100 ohms
- Signal to Noise Ratio:74dB
- Self Noise:20dB
- Color:Black
- Connector:XLR
- Weight:0.76 lbs.
- Included Accessories:Stand Mount, Microphone Pouch
- Manufacturer Part Number:AT2020
RM405.00
RM515.00
- Microphone Type:Condenser
- Polar Pattern:Cardioid
- Diaphragm Size:0.63" (16mm)
- Frequency Response:20Hz-20kHz
- Max SPL:144dB
- Output Impedance:100 ohms
- Signal to Noise Ratio:74dB
- Self Noise:20dB
- Color:Black
- Connector:XLR
- Weight:0.76 lbs.
- Included Accessories:Stand Mount, Microphone Pouch
- Manufacturer Part Number:AT2020
RM415.00
RM515.00
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern:Cardioid
- Frequency Response:20Hz-20kHz
- Power Requirements: USB Power (5V DC)
- Bit Depth: 16 bit
- Sample Rate: 44.1/48 kHz
- Volume Control: Mix control; Headphone volume control
- Weight: 386 g (13.6 oz)
- Dimensions: 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter
- Output Connector: USB-type
- Headphone Output Power: 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load)
- Headphone Jack: 3.5 mm (1/8") TRS (stereo)
- System Requirements: Windows 8.1, Windows 10, and Mac OS X or later; USB 1.0 or 2.0, and 64 MB or more of RAM
- Accessories Included: AT2020USB+ (dark gray model): Pivoting stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable
RM615.00
RM878.00
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern:Cardioid
- Frequency Response:20Hz-20kHz
- Power Requirements: USB Power (5V DC)
- Bit Depth: 16 bit
- Sample Rate: 44.1/48 kHz
- Volume Control: Mix control; Headphone volume control
- Weight: 386 g (13.6 oz)
- Dimensions: 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter
- Output Connector: USB-type
- Headphone Output Power: 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load)
- Headphone Jack: 3.5 mm (1/8") TRS (stereo)
- System Requirements: Windows 8.1, Windows 10, and Mac OS X or later; USB 1.0 or 2.0, and 64 MB or more of RAM
- Accessories Included: AT2020USB+ (dark gray model): Pivoting stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable
RM625.00
RM878.00
- System requirements: USB 1.0 or 2.0, and 64 MB or more of RAM
- Supported OS: Windows 8.1, Windows 10, and Mac OS X or later
- Element: Fixed-charge back plate, permanently polarizeds condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Power Supply: USB Power (5 VDC)
- Bit Depth: 16 bit
- Supported Sampling Rates: 44.1 kHz/48 kHz
- Controls: Headphone level control, Mix control
- Dimensions: 162mm . (6.38") long, 52mm (2.05") maximum body diameter
- Weight: About 386g
- Output connector: USB Type-B
- Headphone Output: 130 mW (at 1 kHz, 10% T.H.D., 32 ohms)
- Headphone Jack: 3.5mm (1/8") stereo mini-jack
- Included Accessories: AT8458a shock mount, S/8"-27 to 3/8"-16 threaded adapter, USB cable (3.0m (9.8'), USB Type-A, USB Type-B, Pouch
RM781.00
RM1,088.00
- System requirements: USB 1.0 or 2.0, and 64 MB or more of RAM
- Supported OS: Windows 8.1, Windows 10, and Mac OS X or later
- Element: Fixed-charge back plate, permanently polarizeds condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Power Supply: USB Power (5 VDC)
- Bit Depth: 16 bit
- Supported Sampling Rates: 44.1 kHz/48 kHz
- Controls: Headphone level control, Mix control
- Dimensions: 162mm . (6.38") long, 52mm (2.05") maximum body diameter
- Weight: About 386g
- Output connector: USB Type-B
- Headphone Output: 130 mW (at 1 kHz, 10% T.H.D., 32 ohms)
- Headphone Jack: 3.5mm (1/8") stereo mini-jack
- Included Accessories: AT8458a shock mount, S/8"-27 to 3/8"-16 threaded adapter, USB cable (3.0m (9.8'), USB Type-A, USB Type-B, Pouch
RM794.00
RM1,088.00
Audio Technica AT2031 Cardioid Condenser End Address Microphone (Audio-Technica / AT-2031 / AT 2031)
- Element: Fixed-charge back plate permanently polarized condenser
- Polar Pattern:Cardioid
- Frequency Response:20Hz-20kHz
- Low Frequency Roll Off: 150Hz, 6 dB/octave
- Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.
- Noise: 17 dB SPL
- Dynamic Range: 124 dB, 1 kHz at max SPL
- Signal-to-Noise Ratio: 77 dB, 1 khz at 1 Pa
- Phantom Power Requirements: 48V DC, 2mA typical
- Switches: Flat, roll-off
- Weight: 134 g
- Dimensions: 143.0 mm long, 21.0 mm maximum body Ø
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8405a stand clamp; windscreen; soft protective pouch
RM789.00
RM878.00
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern:Cardioid
- Frequency Response:20Hz-20kHz
- Low Frequency Roll Off: 80Hz, 12 dB/octave
- Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
- Noise: 12 dB SPL
- Dynamic Range: 136 dB, 1 kHz at max SPL
- Signal-to-Noise Ratio: 82 dB, 1 khz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 3.8mA typical
- Switches: Flat, roll-off; 10 dB pad (nominal)
- Weight: 403 g (14.2 oz)
- Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Audio-Technica Case Style: R5
RM615.00
RM774.00
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern:Cardioid
- Frequency Response:20Hz-20kHz
- Low Frequency Roll Off: 80Hz, 12 dB/octave
- Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
- Noise: 12 dB SPL
- Dynamic Range: 136 dB, 1 kHz at max SPL
- Signal-to-Noise Ratio: 82 dB, 1 khz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 3.8mA typical
- Switches: Flat, roll-off; 10 dB pad (nominal)
- Weight: 403 g (14.2 oz)
- Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Audio-Technica Case Style: R5
RM625.00
RM774.00
- Dynamic microphone delivers warm, assertive broadcast sound that’s perfect for podcasting
- Large diaphragm for smooth, natural sound and low noise
- Multistage foam mesh windscreen provides superior internal pop filtering
- Integrated shock mount attenuates noise, shock and vibration transmitted through mic stands, booms and mounts
- Hypercardioid polar pattern reduces pickup of sounds from the sides and rear for maximum vocal isolation
- Includes pivoting stand mount, 5/8"-27 to 3/8"-16 threaded adapter, and a soft protective pouch
- Element: Dynamic
- Polar Pattern: Hypercardioid
- Frequency Response: 80-16,000 Hz
- Open Circuit Sensitivity: -53 dB (2.2 mV) (0 dB=1 V/Pa, 1kHz)
- Impedance: 600 ohms
- Weight: 615g (21.7 oz)
- Dimensions: 145.3 mm (5.72") long, 52 mm (2.05") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8487 mounting clamp, 5/8”-27 to 3/8”-16 threaded adapter, Pouch
- Audio-Technica Case Style: R13
RM529.00
RM588.00
- Dynamic microphone delivers warm, assertive broadcast sound that’s perfect for podcasting
- Large diaphragm for smooth, natural sound and low noise
- Multistage foam mesh windscreen provides superior internal pop filtering
- Integrated shock mount attenuates noise, shock and vibration transmitted through mic stands, booms and mounts
- Hypercardioid polar pattern reduces pickup of sounds from the sides and rear for maximum vocal isolation
- Includes pivoting stand mount, 5/8"-27 to 3/8"-16 threaded adapter, and a soft protective pouch
- Element: Dynamic
- Polar Pattern: Hypercardioid
- Frequency Response: 80-16,000 Hz
- Open Circuit Sensitivity: -53 dB (2.2 mV) (0 dB=1 V/Pa, 1kHz)
- Impedance: 600 ohms
- Weight: 615g (21.7 oz)
- Dimensions: 145.3 mm (5.72") long, 52 mm (2.05") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8487 mounting clamp, 5/8”-27 to 3/8”-16 threaded adapter, Pouch
- Audio-Technica Case Style: R13
RM539.00
RM588.00
- Element: Externally-polarized (DC bias) condenser
- Polar Pattern:Cardioid, Omnidirectional, Figure-of-Eight
- Frequency Response:20Hz-20kHz
- Low Frequency Roll Off: 80Hz, 12 dB/octave
- Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
- Noise: 17 dB SPL
- Dynamic Range: 136 dB, 1 kHz at max SPL
- Signal-to-Noise Ratio: 77 dB, 1 khz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 4.7mA typical
- Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
- Weight: 412 g (14.5 oz)
- Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Audio-Technica Case Style: R5
RM929.00
RM1,190.00
- Element: Externally-polarized (DC bias) condenser
- Polar Pattern:Cardioid, Omnidirectional, Figure-of-Eight
- Frequency Response:20Hz-20kHz
- Low Frequency Roll Off: 80Hz, 12 dB/octave
- Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
- Noise: 17 dB SPL
- Dynamic Range: 136 dB, 1 kHz at max SPL
- Signal-to-Noise Ratio: 77 dB, 1 khz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 4.7mA typical
- Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
- Weight: 412 g (14.5 oz)
- Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Audio-Technica Case Style: R5
RM939.00
RM1,190.00
- Element: Back electret condenser
- Polar Pattern: Cardioid
- Frequency Response:40Hz-16kHz
- Weight: Approx. 60g (2.1oz) (without cable)
- Cable: 2.0m (6,6’)
- Dimensions: 65mm (2.56”) diameter x 120mm (4.72“)
- Input Connector: USB bus powered
- Output Connector: USB (Type -A)
RM199.00
RM350.00